Autel MaxiIM IM608 Highlights:

1. Comes with XP400 Programmer: XP400 is to read transponder data (especially Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, etc. IMMO application provides Smart Mode and Expert Mode to guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc.

Notice:

1. Pass-Through System

    In-depth diagnosis of all vehicle modules.

    Programming of modules and components of the vehicle.

2. No Australian Holden Software Supported. (Need to contact Australian Local Dealer to get the software)

Autel MaxiIM IM608 OE- Level Diagnostic For 80+ Vehicle Makes:

Compatible with over 80+ US, Asian, and European vehicles, the Autel IM608 goes far beyond communicating with all systems to access all available modules:

Exceptional OE-Level system coverage for all electronic systems;

Active Test for getting access to specific subsystems and performing component tests to drive the actuator so as to determine the integrity of the system or parts;

Complete capabilities for codes, live data, active test, ECU information, adaptation, matching, etc.;

Smart AutoVIN technology for identifying vehicles easily;

Automatic system and software updates with real-time push message notifications via Wi-Fi;

Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes;

Instant remote control tech support anytime, anywhere.

What can Autel APB112 Smart Key Simulator do for you?

1. Smart key simulator

2. 46, 4D data collection

3. 46 smart key password calculation

4. 46 chip simulation

5. Toyota 4D (94/ D4, 98) smart key simulation

6. Toyota H (88/ A8, A9, 39) smart key simulation

7. Collects data from the ignition coil

8. Identify ignition coil troubles

9. Decode vehicle key chip data

10. Simulate vehicle key chip (ex - 4D chip)

11. Must be used with an Autel diagnostic tool

12. Toyota/ Lexus smart key all key lost

13. Chip decoding (Hyundai 46)

Autel G-Box2 Accessory Tool Features:

For Mercedes Benz All Keys Lost, Faster Password Calculation

G-Box2 is compatible with both the Autel MaxiIM IM608 and IM508 with XP400.

Used for Faster Mercedes ECU data and EIS password calculation

For Mercedes DAS3 can EIS / EZS all keys lost

Reduce time reading W204 ECU data & W207 EIS by over 85%

No need to remove and reinsert the key for W221 & W164 after 2009 models

Why Buy Autel G-BOX2 Accessory Tool?

1. Support for Mercedes-Benz All Keys Lost, faster password calculation:

8X Times faster password calculation for EIS W172, W204, W207;

4X Times faster password calculation for EIS W209, W211, ETC.

2. Support for Mercedes-Benz All Keys Lost, no more repeated insertions and removals of IR simulator

W164/-2008, W251/-2008, W164/2009-, W169, W251/2009, W216, W221(partial), W202(K)/W208(K)/W210(K), W203(K)/W463(K)

2. Key Programming Function: The most advanced and smart key programming tool that combines the most powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one Android based 10.1-inch touchscreen tablet, it helps perform complete key programming quickly.

3. IMMO & J2534 ECU Programmer: The Wireless Diagnostic Interface supports two communication methods with the tablet: BT and USB. The working range for BT communication is about 210 feet (70 m). You can perform key programming and vehicle diagnosis on various vehicles conveniently, by pairing the tablet separately to each of the MaxiFlash. (Note: J2534 can't program ECU with the IM608)

4. ECU Coding & Active Test & 23+ Services Function: Bi-directional control of the ECM is useful in determining whether the ECM responds to a command well. And Auto VIN Identification, ECU Coding are available for IM608. Most useful service including: Oil Reset Service/ EPB Service/ BMS Service/ SAS Service/ DPF Service etc. Powerful OE level diagnostics for more than 80 US, Asian and European makes and models.